|
| Brand Name: | SUNCAR |
| Model Number: | 421-22-32460 4212232460 |
| MOQ: | 100 PCS |
| Price: | Negotiation |
| Packaging Details: | PP bag inside, carton box outside |
| Payment Terms: | Western Union, L/C, T/T, , D/A, D/P, Paypal |
421-22-32460 4212232460 Rear Axle Drive Seal Loader Oil Seal For Komatsu WA400, WA430, WA450, WA470 Wheel Loader
| Product Name | Rear Axle Drive Seal |
| Models | KOMATSU WA400, WA430, WA450, WA470 Wheel Loader |
| Material | NBR |
| Part Number | 421-22-32460 |
| Place of Origin | China(Mainland) |
| Brand name | SUNCAR |
| Packing | PP bag inside, carton box outside |
| Shipping Mode | By air, by sea, by express(Fedex, UPS, DHL, TNT, etc.) |
| Payment Terms | Western Union, L/C, T/T, Money Gram, D/A, D/P |
| CertifiC.A.Tion | ISO9001 |
| Warranty | Unavailable |
| Customized | OEM & ODM are welcomed |
| Size | OEM standard size |
| Position | Hydraulic oil seals |
| AppliC.A.Tion | Mechanical, komatsu wheel loaders/grader |
| Condition | New, genuine new |
| Applicable Industries | Engineering machinery |
Measures For Oil Leakage Due To Inadequate Oil Seal:
1. Master and recognize the basic knowledge of fake and inferior products, and purchase high-quality and standard oil seals.
2. During installation, if the roughness of the outer surface of the shaft diameter is low or there are defects such as rust, burrs, etc., smooth it with a fine emery cloth or whetstone; apply clean engine oil or grease to the lip of the oil seal or the corresponding position of the shaft diameter. Apply sealant to the outer ring of the oil seal, wrap the key way on the shaft with hard paper to avoid scratching the lip of the oil seal, and use a special tool to rotate and press the oil seal inwards. Do not smash the hard seal to prevent deformation of the oil seal or squeeze the spring and fail; If there is lip cuffing, the spring falls off and the oil seal is skewed, It must be removed and reinstalled. It should be noted that when the shaft diameter is not worn and the spring force of the oil seal spring is sufficient, do not tighten the inner spring without authorization.
3. The oil seals applied to machinery generally have to be inspected, maintained and maintained when the general working conditions are poor, the ambient temperature difference is large, the dust is excessive, and the vibration of the machine tool frequently changes the stress condition of the machine parts.
4. If the shaft diameter and bearing are seriously worn; The rubber seal oil is aging or the spring is invalid, etc., repair and replace the corresponding parts in time.
Related Parts:
|
Pos.
|
Part No | Qty | Parts name | Comments |
| 424-22-30061 | [1] | Axle Assembly Komatsu China | ||
| 424-22-32020 | [1] | Final Drive Komatsu China | ||
| 1 | 421-23-32530 | [3] | Gear Komatsu | 5.29 kg. |
| 2 | 421-23-32810 | [6] | Bearing Komatsu China | |
| 3 | 421-23-32630 | [1] | Carrier Komatsu China | |
| 4 | 421-23-32352 | [1] | Washer Komatsu | 1.7 kg. |
| 5 | 421-23-32511 | [3] | Shaft Komatsu China | |
| 6 | 421-22-32570 | [3] | Pin Komatsu China | |
| 7 | 424-22-32431 | [1] | Shaft, Axle Komatsu China | |
| 7 | 424-22-32430 | [1] | Shaft, Axle Komatsu China | |
| 8 | 421-22-32850 | [1] | Bearing Komatsu | 7.2 kg. |
| 9 | 421-22-32460 | [1] | Seal, Dust Komatsu OEM | 0.49 kg. |
| 10 | 421-22-41860 | [1] | Bearing Komatsu China | |
| 10 | 421-22-11860 | [1] | Bearing Komatsu | 2.52 kg. |
| 11 | 421-23-32543 | [1] | Gear Komatsu | 17.65 kg. |
| 12 | 419-22-12581 | [4] | Pin, Dowel Komatsu | 0.062 kg. |
| 13 | 01011-62210 | [1] | Bolt Komatsu | 0.406 kg. |
| 14 | 421-23-32470 | [3] | Shim, T=0.05mm Komatsu | 0.01 kg. |
| 14 | 421-23-32480 | [2] | Shim, T=0.2mm Komatsu | 0.01 kg. |
| 14 | 421-23-32490 | [3] | Shim, T=0.5mm Komatsu | 0.02 kg. |
| 15 | 421-23-32421 | [1] | Shaft Komatsu China | |
| 16 | 424-22-33920 | [1] | Housing Komatsu China | |
| 17 | 421-33-31711 | [1] | Shaft Komatsu China | |
| 18 | 421-33-31730 | [1] | Cap Komatsu | 0.07 kg. |
| 19 | 421-33-31721 | [1] | Guide Komatsu China | |
| 20 | 01583-11610 | [1] | Nut Komatsu | 0.028 kg. |
| 21 | 07000-11005 | [1] | O-ring Komatsu | 0.001 kg. |
| 22 | 07000-12018 | [1] | O-ring Komatsu China | 0.001 kg. |
| 23 | 424-22-33250 | [1] | Plug Komatsu China | |
| 24 | 07002-13634 | [1] | O-ring Komatsu China | 0.013 kg. |
Welcome OEM/ODM order. Please click "ask a question", or call us if you have a parts need that you do not see listed here.
|
|
| Brand Name: | SUNCAR |
| Model Number: | 421-22-32460 4212232460 |
| MOQ: | 100 PCS |
| Price: | Negotiation |
| Packaging Details: | PP bag inside, carton box outside |
| Payment Terms: | Western Union, L/C, T/T, , D/A, D/P, Paypal |
421-22-32460 4212232460 Rear Axle Drive Seal Loader Oil Seal For Komatsu WA400, WA430, WA450, WA470 Wheel Loader
| Product Name | Rear Axle Drive Seal |
| Models | KOMATSU WA400, WA430, WA450, WA470 Wheel Loader |
| Material | NBR |
| Part Number | 421-22-32460 |
| Place of Origin | China(Mainland) |
| Brand name | SUNCAR |
| Packing | PP bag inside, carton box outside |
| Shipping Mode | By air, by sea, by express(Fedex, UPS, DHL, TNT, etc.) |
| Payment Terms | Western Union, L/C, T/T, Money Gram, D/A, D/P |
| CertifiC.A.Tion | ISO9001 |
| Warranty | Unavailable |
| Customized | OEM & ODM are welcomed |
| Size | OEM standard size |
| Position | Hydraulic oil seals |
| AppliC.A.Tion | Mechanical, komatsu wheel loaders/grader |
| Condition | New, genuine new |
| Applicable Industries | Engineering machinery |
Measures For Oil Leakage Due To Inadequate Oil Seal:
1. Master and recognize the basic knowledge of fake and inferior products, and purchase high-quality and standard oil seals.
2. During installation, if the roughness of the outer surface of the shaft diameter is low or there are defects such as rust, burrs, etc., smooth it with a fine emery cloth or whetstone; apply clean engine oil or grease to the lip of the oil seal or the corresponding position of the shaft diameter. Apply sealant to the outer ring of the oil seal, wrap the key way on the shaft with hard paper to avoid scratching the lip of the oil seal, and use a special tool to rotate and press the oil seal inwards. Do not smash the hard seal to prevent deformation of the oil seal or squeeze the spring and fail; If there is lip cuffing, the spring falls off and the oil seal is skewed, It must be removed and reinstalled. It should be noted that when the shaft diameter is not worn and the spring force of the oil seal spring is sufficient, do not tighten the inner spring without authorization.
3. The oil seals applied to machinery generally have to be inspected, maintained and maintained when the general working conditions are poor, the ambient temperature difference is large, the dust is excessive, and the vibration of the machine tool frequently changes the stress condition of the machine parts.
4. If the shaft diameter and bearing are seriously worn; The rubber seal oil is aging or the spring is invalid, etc., repair and replace the corresponding parts in time.
Related Parts:
|
Pos.
|
Part No | Qty | Parts name | Comments |
| 424-22-30061 | [1] | Axle Assembly Komatsu China | ||
| 424-22-32020 | [1] | Final Drive Komatsu China | ||
| 1 | 421-23-32530 | [3] | Gear Komatsu | 5.29 kg. |
| 2 | 421-23-32810 | [6] | Bearing Komatsu China | |
| 3 | 421-23-32630 | [1] | Carrier Komatsu China | |
| 4 | 421-23-32352 | [1] | Washer Komatsu | 1.7 kg. |
| 5 | 421-23-32511 | [3] | Shaft Komatsu China | |
| 6 | 421-22-32570 | [3] | Pin Komatsu China | |
| 7 | 424-22-32431 | [1] | Shaft, Axle Komatsu China | |
| 7 | 424-22-32430 | [1] | Shaft, Axle Komatsu China | |
| 8 | 421-22-32850 | [1] | Bearing Komatsu | 7.2 kg. |
| 9 | 421-22-32460 | [1] | Seal, Dust Komatsu OEM | 0.49 kg. |
| 10 | 421-22-41860 | [1] | Bearing Komatsu China | |
| 10 | 421-22-11860 | [1] | Bearing Komatsu | 2.52 kg. |
| 11 | 421-23-32543 | [1] | Gear Komatsu | 17.65 kg. |
| 12 | 419-22-12581 | [4] | Pin, Dowel Komatsu | 0.062 kg. |
| 13 | 01011-62210 | [1] | Bolt Komatsu | 0.406 kg. |
| 14 | 421-23-32470 | [3] | Shim, T=0.05mm Komatsu | 0.01 kg. |
| 14 | 421-23-32480 | [2] | Shim, T=0.2mm Komatsu | 0.01 kg. |
| 14 | 421-23-32490 | [3] | Shim, T=0.5mm Komatsu | 0.02 kg. |
| 15 | 421-23-32421 | [1] | Shaft Komatsu China | |
| 16 | 424-22-33920 | [1] | Housing Komatsu China | |
| 17 | 421-33-31711 | [1] | Shaft Komatsu China | |
| 18 | 421-33-31730 | [1] | Cap Komatsu | 0.07 kg. |
| 19 | 421-33-31721 | [1] | Guide Komatsu China | |
| 20 | 01583-11610 | [1] | Nut Komatsu | 0.028 kg. |
| 21 | 07000-11005 | [1] | O-ring Komatsu | 0.001 kg. |
| 22 | 07000-12018 | [1] | O-ring Komatsu China | 0.001 kg. |
| 23 | 424-22-33250 | [1] | Plug Komatsu China | |
| 24 | 07002-13634 | [1] | O-ring Komatsu China | 0.013 kg. |
Welcome OEM/ODM order. Please click "ask a question", or call us if you have a parts need that you do not see listed here.
