Mechanical Seals PUR Lip Dust Seal C.A.T Wiper Seal For Hydraulic Cylinder

Purpose Of Lip Seals:

The primary purpose of a lip seal is to exclude contaminants while retaining lubricants. By nature, lip seals function by maintaining friction. They can be used in a variety of appliC.A.Tions from slow-moving equipment to high-speed rotation and in temperatures from below freezing to more than 500 degrees F.

Lip Seal Installation Checklist:

• The elastomer is not damaged (no nicks, scratches, cuts, etc.)
• The case is not damaged (no nicks, cuts, dents, etc.)
• The garter spring is properly placed (if used).
• Wipe the seal and shaft of any debris.
• The assembly lube is compatible with the lubricant in operation.
• The case is of the proper specifiC.A.Tion.
• The elastomer is of the proper specifiC.A.Tion.
• The lip seal is pointing in the correct direction.
• The shaft is free of defects (no nicks, scratches, grooves, etc.)
• The bore is free of defects (no nicks, debris, roundness, etc.)
• There is adequate ventilation of equipment when stored or in operation.
• Proper installation tools are used to avoid damaging seals.
• Equal pressure is applied during installation to ensure the seal is not cocked.

Size Of LIP Dust Wiper Seal:

Part Number Of  LIP Dust Wiper Seal:

Types Of Seals:

Piston Seal: SPGW, SPGW2, SPGWV, SPGO, SPGA, OK, GKS/YS, KDAS/DAS, SPG, SPGM, SPGN, SPGC, OHM, CPI, CPH, ODI, OSI, OUIS, OUHR, OKH, OUY.

Piston Rod Seal: IDI, ISI, IUIS, IUH, PTB, H605, SPNO, SPN, SPNS, SPNC, U-CUP.

Piston And Piston Rod Seal: UPI, USI, UPH, USH, V99F, V96H, UN, UHS, UNS.

Buffer Seal: HBY, HBTS, HBTY, URE.

Dust Seal For ReciproC.A.Ting Motion: DKI, DWI, DWIR, DKBI, DKBI3, DKBZ, DKH, DKB, GA, DSI, LBI, LBH, LBHK, DSPB, DHS, FA, LPI, A1, GHP, Type A - Single Lip Wiper, Type B - Double Lip Wiper, Type D - Single Lip Wiper.

Dust Seal For Shake: DLI, DLI2, VAY.

Oil Seal: SC, SB, TC, TB, TCK, VC, VB, KC, KB, TCZ, TCV, TCN, TC4, TB4, TCJ, SA1J, VAJ, KA3J, DC, DB, OC, etc.

Product Image: